Arm Cover Bowen Med Logo.png

Blood Pressure > Cuff-Guard

 

Founded in 1994, Bowen Medical’s mission has always been to ensure the safety of patients, families, and employees. Over the 26 years we have been in business, we have been making a difference in the United States and abroad, by manufacturing affordable and disposable medical covers to combat cross-contamination. With over 35 years of experience as a trauma nurse, Thomas Bowen understood the compassion and peace of mind every patient deserves. These values are still instilled in us today and are what strive to us to continue our mission.

CUFF-GUARD

Disposable BP Cuff Cover

Cuff-Guard Image 2.jpg
Cuff-Guard Image.jpg

An affordable single use cover for blood pressure cuffs designed to be disposed after each single use. The Cuff-Guard is made from medical grade Tyvek making it heavy duty and impervious to blood and other bodily fluids. The blood pressure cuff is placed into the Cuff-Guard, similar to envelope. Simply, pull the pull away tape to seal in the cuff, and it is ready to be used. It is 100% effective, easy to use, prolongs the life of the cuff, and ensures the safety of patients. The Cuff-Guard is most commonly used in emergency rooms, surgery centers, and in EMS situations where there will higher chances of cross-contamination, blood, or bodily fluids.

Instructions:

 

1. Place Blood Pressure Cuff inside the opening of the Cuff-Guard as shown. The velcro side should be facing up and the opening on the bottom. When inserting the Blood Pressure Cuff, the tubing should be to the right.

2. Once the cuff is slide into place, peel off the liner to expose the tape on the bottom layer and close.

3. Proceed to wrap the Cuff-Guard around the patient and use. The Cuff-Guard is a single use product. After it is used, pull the cuff out and dispose of the Cuff-Guard.

Size

  • ADULT                          

Single cover measures 23" long x 7" wide 

Pack of 20 measures 23" x 7" x 3"

Case of 120 (6 packs of 20) measures 14" x 14" x 6"

  • ADULT-LONG              

Single cover measures 25" long x 7" wide 

  • LARGE-ADULT 

Single cover measures 26" long x 7.5" wide 

  • CHILD

Single cover measures 15" long x 5" wide 

  • INFANT

Single cover measures 12" long x 4" wide 

 

ARM-GUARD

Arm Guard image.jpg

Made out of clear, latex free, and soft poly-tubing. The Arm-Guard comfortably slides over the thumb and forearm and uses an elastic band to ensure it does not slide down over time. Perfect for work environments dealing with cross-contamination, blood, chemical or biological chemicals where an employee is wearing a short sleeve shirt. Due to its affordability and effectiveness, large EMS units routinely use our Arm-Guard.

Instructions:

 

  • 1.  Slide arm through the Arm-Guard.

  • 2. Slide thumb through the hole.

  • 3. Put a glove on over the Arm-Guard.

  • 4. The Arm-Guard is a single use product, dispose after use.

Size
  • Universal 

Pack of 50 (25 pairs)

Package of 50 measures   10" x 3" x 6.5"

 

ARM-COVER

Arm Cover Bowen Med.png

Our Arm-Cover is a new, fast, and easy to use blood pressure cuff sleeve. Made out of clear, latex free, and soft poly-tubing, it is lightweight and breathable. Similar to the Cuff-Guard it acts as a barrier between your arm and a blood pressure cuff. The two elastic bands enable the Arm-Cover to slide over the patients and be held in place. Then the blood pressure cuff is put on as usual. Allowing for a quick and effective method in preventing cross-contamination. Due to its simple design and quickness, it is commonly used in out-patient clinics, family centers, and small emergencies where there the blood pressure cuff is less likely to be contaminated by blood or bodily fluids. 

Instructions:

 

1. Take the Arm-Cover and slide it over the patients arm.

2. Take the Blood Pressure Cuff and apply it over the Arm-Cover.

3. The Arm-Cover is a single use product. After it is used, remove the cuff and dispose of the Arm-Cover.

Size
  • ADULT

10" diameter 

Pack of 50

  • Large-Adult

16" diameter

Pack of 50 

 

TOURNIQUET COVERS

Tourniquet Cover Image.jpg

Made out of clear, latex free, and soft poly-tubing. Our Tourniquet-Cover is used in surgical and EMS settings to prevent cross-contamination. Blood and bodily fluids regularly contaminate tourniquets or vascular covers. Simply wrap the area of the limb, where you will place the tourniquet, with webril or other material to prevent wrinkles in the skin. Then slide the Tourniquet-Cover over the webril, apply the tourniquet in usual fashion, and fold each end of the Tourniquet-Cover over the tourniquet. 

tourniquet bw.png

Instructions:

 

1. Wrap area with Webril or soft material to prevent wrinkles.

2. Place the Tourniquet-Cover over the site for the Tourniquet.

3. Place tourniquet as routinely done. Take each end and fold it back over the tourniquet cuff.

4. The tourniquet should be fully enclosed by the Tourniquet-Cover. The Tourniquet-Cover is a single use product. After it used, dispose of the Tourniquet-Cover.

Size
  • ADULT

10" diameter 

Pack of 50

  • Large-Adult

16" diameter

Pack of 50