top of page
MOST-T Logo.png
Class B
MOST-T Class B.png

MOST-T Steam Sterilizer: T18/24/45/60/80 is a full automatic high-temperature and high-pressure rapid sterilization equipment using pressure steam as medium. It is used for sterilization of medical devices, laboratory vessels, culture media and non-confined liquids or preparations , materials that may come into contact with blood or body fluids in medical and health care, scientific research and other units.

Product Features

  • Built-in open tank

    • ​Built-in open tank structure makes it easy to clean, and the tank can run the cycle several times after filling it with water at one time. Meanwhile, it is equipped with water quality monitoring module to ensure the reliability of steam quality and the normal operation of the equipment at the same time.

  • Brand new operation interface

    • The new operation interface with LCD screen can display temperature, pressure, time operation state, alarm and other information, which makes the sterilization information more intuitive and clear, and makes it easy for users to observe the running state of the equipment.​

  • Multiple safety protection devices​

    • Over-temperature automatic protection device, multiple control and protection of steam generator, door safety interlock protection, double over-pressure protection, electronic circuit safety device.​

  • Automatic door structure​

    • T18/24/45 adopts automatic door structure, which is quick and convenient to operate and effectively protects human body. T60/80 sterilizer door structure adopts multi-point synchronous linkage pressing technology, which makes the door seal more reliable, and on-click door opening and closing is quick and labor-saving.​

  • Highly efficient ultimate vacuum

    • ​Adopt high-efficiency vacuum system, low working noise, the ultimate vacuum reaches above -90kPa, fast evacuation speed, good drying effect, and more thorough sterilization

  • Rich cycles

    • ​Sterilization cycles such as 134UNIV.cycle, 121UNIC.cycle, B-QUICK cycle, N-QUICK cycle, PRION Cycle, LIQUID cycle; BD&Helix, LEAK TEST cycles such as WARM UP and DRYING cycles.​

  • Highly efficient steam generator​

    • T18/24/45 with built-in instant steam generator and T60/80 with built-in boiler, which produce steam fast and high-quality.

  • Other performance features

    • 0.22 um sterilization high efficiency air filter to ensure that the air is sterile to avoid re-contamination of sterile items. Automatic running of water filling, pulse vacuum, heating, sterilization, venting and vacuum drying in the whole process. Jacket membrane, energy-saving and time-saving.

Features Image.png
MOST-T Logo.png
Class S
MOST-T Class S.png

MOST-T Steam Sterilizer: T24/45/80-S is a full automatic high-temperature and high-pressure rapid sterilization equipment using pressure steam as medium. It is used for sterilization of medical devices, laboratory vessels, culture media and non-confined liquids or preparations , materials that may come into contact with blood or body fluids in medical and health care, scientific research and other units.

Features

  • Built-in open tank

    • ​Built-in open tank structure makes it easy to clean, and the tank can run the cycle several times after filling it with water at one time. Meanwhile, it is equipped with water quality monitoring module to ensure the reliability of steam quality and the normal operation of the equipment at the same time.

  • Brand new operation interface

    • The new operation interface with LCD screen can display temperature, pressure, time operation state, alarm and other information, which makes the sterilization information more intuitive and clear, and makes it easy for users to observe the running state of the equipment.​

  • Highly efficient steam generator

    • T24/45-S with built-in instant steam generator and T80-S with built-in boiler, which produces fast and high-quality.

  • Rich cycles

    • Sterilization cycles such as 134UNIV., 121UNIV., N-QUICK, PRION, USER, LIQUID and auxiliary cycles such as WARM UP and DRYING.

  • Automatic door structure​

    • T24/45-S adopts automatic door structure, which is quick and convenient to operate and effectively protects human body. T80-S sterilizer door structure adopts multi-point synchronous linkage pressing technology, which makes the door seal more reliable, and on-click door opening and closing is quick and labor-saving.​

  • Multiple safety protection devices​

    • Over-temperature automatic protection device, multiple control and protection of steam generator, door safety interlock protection, double over-pressure protection, electronic circuit safety device.​

MOST-T Logo.png
Endoscope Steam Sterilizer
Class B
MOST-T Endoscope Class B.png

MOST-T Steam Sterilizer: T25 is a full automatic high-temperature and high-pressure rapid sterilization equipment using pressure steam as medium, with induction operation, which can sterilize long instruments such as endoscopes. It is used for sterilization of medical devices, laboratory vessels, culture media and non-confined liquids or preparations, materials that may come into contact with blood or body fluids in medical and health care, scientific research and other units.

Features

  • Special endoscope sterilization cycle

    • Special sterilization cycle, consistent temperature inside and outside the endoscope, no harm to the instruments.​

  • Endoscope loading device​

    • Special extended sterilization tray for loading lumpectomy instruments up to 580 mm in length​

  • Built-in open tank

    • ​Built-in open tank structure makes it easy to clean, and the tank can run the cycle several times after filling it with water at one time. Meanwhile, it is equipped with water quality monitoring module to ensure the reliability of steam quality and the normal operation of the equipment at the same time.

  • Brand new operation interface

    • The new operation interface with LCD screen can display temperature, pressure, time operation state, alarm and other information, which makes the sterilization information more intuitive and clear, and makes it easy for users to observe the running state of the equipment.​

  • Rich cycles

    • Sterilization cycles such as 134UNIV., 121UNIV., N-QUICK, PRION, USER, LIQUID and auxiliary cycles such as WARM UP and DRYING.

  • Multiple safety protection devices​

    • Over-temperature automatic protection device, multiple control and protection of steam generator, door safety interlock protection, double over-pressure protection, electronic circuit safety device.​​

  • Automatic door structure​

    • Automatic door structure, which is quick and convenient to operate and effectively protects human body.

  • Highly efficient ultimate vacuum

    • ​Adopt high-efficiency vacuum system, low working noise, the ultimate vacuum reaches above -90kPa, fast evacuation speed, good drying effect, and more thorough sterilization

  • Highly efficient steam generator​

    • Built-in instant steam generator, which produce steam fast and high-quality.

  • Other performance features

    • 0.22 um sterilization high efficiency air filter to ensure that the air is sterile to avoid re-contamination of sterile items. Automatic running of water filling, pulse vacuum, heating, sterilization, venting and vacuum drying in the whole process. Jacket membrane, energy-saving and time-saving.

MOST-T Logo.png
Steam Sterilizer Class B
MOST-T60.png

MOST-T Steam Sterilizer: T60/80-G is a full automatic high-temperature and high-pressure rapid sterilization equipment using pressure steam as medium and induction key operation. It adopts high-efficiency double vacuum system and large-capacity boiler, which can evacuate and produce steam faster than MOST-T conventional series sterilizers. It is used for sterilization of medical devices, laboratory vessels, culture media and non-confined liquids or preparations, materials that may come into contact with blood or body fluids in medical and health care, scientific research and other units.

Features

​​

  • Automatic door structure​

    • T60/80 Sterilizer door structure adopts multi-point synchronous linkage pressing technology, which makes the door seal more reliable, and one-click door opening, quick and labor saving.

  • Highly efficient ultimate vacuum

    • ​Adopt high-efficiency vacuum system, low working noise, the ultimate vacuum reaches above -90kPa, fast evacuation speed, good drying effect, and more thorough sterilization

  • Multiple safety protection devices​

    • ​Over-temperature automatic protection device, multiple control and protection of steam generator, door safety interlock protection, double over-pressure protection, electronic circuit safety device.​

  • Highly efficient steam generator​

    • Built-in large-capacity boiler, which generates steam faster and more efficiently than MOST-T conventional series Sterilizers.

​​

  • Built-in open tank

    • ​Built-in open tank structure makes it easy to clean, and the tank can run the cycle several times after filling it with water at one time. Meanwhile, it is equipped with water quality monitoring module to ensure the reliability of steam quality and the normal operation of the equipment at the same time.

  • Brand new operation interface

    • The new operation interface with LCD screen can display temperature, pressure, time operation state, alarm and other information, which makes the sterilization information more intuitive and clear, and makes it easy for users to observe the running state of the equipment.

  • Rich cycles

    • Sterilization cycles such as 134UNIV., 121UNIV.cycle, B-QUICK cycle, N-quick cycle, PRION cycle, USER cycle, LIQUID cycle; BD&Helix, LEAK TEST cycles; auxiliary cycles such as WARM UP and DRYING cycles.

  • Other performance features

    • 0.22 um sterilization high efficiency air filter to ensure that the air is sterile to avoid re-contamination of sterile items. Automatic running of water filling, pulse vacuum, heating, sterilization, venting and vacuum drying in the whole process. Jacket membrane, energy-saving and time-saving.

bottom of page